VHT FLAMEPROOF™ Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is widely used by the automotive industry on exhaust systems, and the aerospace industry for jet engines, re-entry vehicles and other high temperature paint applications.
Temperature 1300°F-2000°F (704°C-1093°C) Intermittent
Dry Time Curing time required and can be done on or off vehicle (see below).
Applications Headers, Exhaust Systems, Piston Domes, Inside Heads
Finish Flat
SIZES
1 Quart Non - Aerosol
11oz Aerosol
HOW TO USE
Available in These Colors:
FIND A RETAILER
Curing FLAMEPROOF™ VHT FLAMEPROOF™ Coating only attains its unique properties after correct curing (refer to instructions on the can).
-
On the Vehicle
- Paint must be completely dry before curing
- Run at idle for 10 minutes
- Cool for 20 minutes
- Run at idle for 20 minutes
- Cool for 20 minute
- Run under normal operating conditions for 30 minutes
-
Off the Vehicle
- Paint must be completely dry before curing
- Heat to 250°F (121°C) for 30 minutes
- Cool for 30 minutes
- Heat to 400°F (204°C) for 30 minutes
- Cool for 30 minutes
- Heat to 650°F (343°C ) for 30 minutes
Coating System VHT provides a high-performance coating system for the ultimate in protection and quality. The system includes surface preparation, primer, paint and clear coat.
Prime
SP100
FLAMEPROOF™ Primer
Coat
SPXXX
FLAMEPROOF™ Color
Finish
SP115
FLAMEPROOF™ Clear
Coating System VHT provides a high-performance coating system for the ultimate in protection and quality. The system includes surface preparation, primer, paint and clear coat.
Prime
SP100
FLAMEPROOF™ Primer
Coat
SPXXX
FLAMEPROOF™ Color
Finish
SP115
FLAMEPROOF™ Clear